How To Fix Quiet AirPods will be described in this article. The most widely used wireless earphones in the world, AirPods have sold hundreds of millions of units and are easily recognized on any city’s streets these days.
They have excellent connectivity, a recognizable design, are small, and sync perfectly with the iPhone. That’s why it could be worrying if your AirPods suddenly become silent and you are unable to hear music or people on the other end of calls.
How To Fix Quiet AirPods In 2024
In this article, you can know about How To Fix Quiet AirPods here are the details below;
But there’s probably a method to solve it. Before you rush to the store to get a new pair, try the tips listed below if you discover the volume on your AirPods is low and you’re wondering how to make them louder.
With more than 240 programs on Setapp, you can speed up your Mac, remove duplicates from your iPhone, fix your AirPods, and much more.
Why are my AirPods so quiet?
Surprisingly, the most frequent cause of the AirPods’ excessively low sound is an overly low volume setting on the iPhone or Mac. To check if the problem still exists, try increasing the volume on the linked device.
Although AirPods may eventually lose their maximum volume, they should still be audible enough for regular activities like conference calls and music listening.
“Why is one of my AirPods louder than the other?” is a question you may have. Most likely, it’s because the audio balance is wrong. Move the balance slider to the middle under Settings ➙ Accessibility ➙ Audio/Visual to fix it.
Additional causes of AirPods sounding low could be:
- Earwax or dirt adjacent to the speaker
- Having a discharged battery
- Active noise cancellation
- Issues with Bluetooth connectivity
- Physical harm
How to fix quiet AirPods
By following the short checklist below, which includes both configuring your Mac and iPhone as well as troubleshooting the AirPods, you can rapidly turn up the volume on your headphones.
Reset your AirPods
Resetting your AirPods restores their factory default settings, eradicating any potential software issues that may have made their way in.
Resetting AirPods:
- Replace them in the charging case, making sure the cover is left open.
- When the light on the case begins to flash white, press and hold the button for about ten seconds.
- End the case.
To see whether anything has changed, try reconnecting your AirPods to your Mac or iPhone.
Check battery and recharge AirPods
Every time AirPods are in their case, they are recharged. In this instance, even five minutes should result in around an hour of speaking or listening time.
You can use the Lightning cord to connect to a power bank, Mac, or the closest outlet if the case’s battery is going low.
Place your AirPods in the case and leave the lid open to see how much battery life they have left. When they are linked to your iPhone, the battery indicator ought to appear on its own. On a Mac, use System Preferences or the menu bar to access the Bluetooth menu.
Consider using AirBuddy if you would like to conveniently monitor a few Bluetooth devices that you own.
With just a single click & the connect and disengage from any wireless device with AirBuddy, which tracks all of your wireless devices from the menu bar and keeps an eye on their battery levels. Additionally, you may transfer wireless devices across Macs with a single click, personalize shortcuts, and get low power notifications.
Batteries is an additional helpful app for monitoring battery levels.
With Batteries, you can quickly examine the battery life of all your wireless devices—including your iPhone and iPad—in a single list. Also, you can view the current battery level directly in your Touch Bar and receive low battery notifications.
Perform ear tip fit test
The ear tip fit test on the new AirPods Pro is a terrific way to increase sound isolation (available only on iOS 13.2 and later).
To take the examination:
Link your AirPods to your iPhone, then select Ear Tip Fit Test under Settings ➙ Bluetooth.
Select the ear tip size that best suits you by tapping Play and waiting for the results.
Check iPhone sound settings
Check your iPhone’s sound settings if you’re using your AirPods with it to see if there are any settings that could be causing audio problems.
In the Bluetooth settings, confirm that the AirPods are paired. Verify sure the volume on the device is at a standard setting. Also check How To Fix Apple’s Freeform Not Working Issues
To enable stereo output from your AirPods, make sure the mono sound is turned off by going to Settings ➙ Accessibility ➙ Audio/Visual.
Check Mac sound settings
Prior to using your Mac with AirPods, make sure to adjust the Bluetooth settings and volume. Next, try using any app or the internet to play music or podcasts.
Look for an online hearing test (such as the one at chs.ca/audiology/online-hearing-exam) and take it to determine the range of sounds you’re experiencing problems with.
When it comes to enhancing the sound that emanates from your speakers, Boom 3D offers all you need. A dedicated volume control for each app, a patent-pending surround sound feature, an accurate equalization and enhancer, and an audio boost that can boost sound levels over the maximum output of the Mac speakers are all included. A wonderful experience for audiophiles!
All you have to do is launch the Boom 3D app and select the 3D Surround option when you’re listening to music. Once there, you can use a slider to change the bass levels and the 3D audio’s intensity. Try experimenting with each slider to see which level is most comfortable for you.
Run maintenance scripts on Mac
Another possible cause of the low power and volume of the AirPods could be audio-related macOS problems that are hard to troubleshoot. Also check How to Fix Roblox Error Code 268
CleanMyMac X, an optimization tool, could, nevertheless, quickly fix the issue.
One-click scans to optimize, clean, debug, and safeguard your Mac are available with CleanMyMac X. It may be used to clean out outdated files, uninstall apps entirely, delete browser cache, and execute maintenance routines to optimize your Mac and potentially fix any audio problems connected to AirPods.
To use CleanMyMac X to execute maintenance scripts:
- Open the application
- Select Maintenance from the sidebar.
- Choose Execute Maintenance Scripts
- Run the scripts for maintenance.
Check Apple Music or Spotify settings
If you use your AirPods to play audio from Apple Music or Spotify, the issue may be with the apps rather than the hardware.
First, try restarting the music app. Next, navigate to the settings and confirm that the correct output device (AirPods, not the external speaker) is selected, the equalizer is set to normal, the sound volume is approximately correct, and everything else seems good. The latter occasionally results in the AirPods being connected, but the sound emanating from a phone or other device.
Contact Apple support
For all of its devices, Apple offers repair and warranty coverage. Your iPhone’s Bluetooth settings allow you to check if the coverage is still in effect by going to AirPods > Warranty.
If so, take them to the closest Apple Store or send an online support request to Apple. You can still get the AirPods mended even if the coverage has ended, but you might have to pay for it.
As you can see, all you need to do to solve quiet AirPods is follow the above methods, and one of the solutions ought to work. Try also optimizing your experience with fantastic Mac apps like Boom 3D for superb sounding speakers, AirBuddy and Batteries for monitoring battery levels, and CleanMyMac X for a Mac that is bug-free and optimized.
Best of all, AirBuddy, Batteries, Boom 3D, and CleanMyMac X are all accessible to you for free for the seven days through trial of Setapp, a platform featuring more than 240 handpicked apps for Mac and iOS spanning any category you can imagine. Check out all of Setapp’s apps for free right now to discover new favorites to add to your stack.
