Best Methods to Fix Firestick Remote Not Working will be discussed in this article. People have switched from using cables to Smart TVs and streaming devices like firesticks as a result of technical developments. The experience of the users is greatly improved by these devices. When working correctly, it can convert a standard TV into a smart TV. A TV remote and a dongle that plugs into your TV are included with these streaming devices.
5 Methods To Fix Firestick Remote Not Working
In this article, you can know about 5 Methods To Fix Firestick Remote Not Working here are the details below;
People have recently complained that their Firestick remote does not function properly, though. When you want to watch your favourite movie or television show and the remote suddenly stops working, it might be annoying. Do you have the same issue? Do not be concerned; we are here to assist you.
We’ll talk about possible solutions to the “Firestick Remote not working” problem in this article.
What is the root of your Firestick remote’s malfunction?
A Fire Stick remote’s operation may be affected by a number of conditions, or it may not function at all. Dead batteries, objects in the way of the remote’s signals, and electrical interference are a few typical causes. Never forget that, if nothing else seems to work, you can always reset your Fire Stick to its factory default settings.
The following are the most frequent problems that lead a Fire Stick remote to stop working:
Dead Batteries: Dead batteries are the most common reason for a malfunctioning Fire Stick remote. Other battery-related problems include incorrectly installed batteries, low battery charge, etc.
Pairing: You won’t be able to use your remote unless you first couple it with your Fire Stick. Before use, all Firestick remote controls require pairing.
Range: Because a Fire Stick remote uses Bluetooth instead of infrared, it has a theoretical range of about 30 feet. But keep in mind that this is only the advertised range; the actual range is far smaller.
Obstruction: No direct line of sight is necessary between your Fire Stick and the remote, although walls and other obstructions will significantly reduce the signal strength.
Interference: Bluetooth-interfering gadgets may prevent the operation of your remote.
Compatibility: Make sure your new remote is compatible with your Fire Stick if you recently purchased one.
Damaged Remote: Water, internal problems with your remote, etc. could have led to damage to your Firestick remote.
How Can I Fix My Amazon Firestick’s Remote?
After talking about the causes of the Amazon Firestick remote’s malfunction, it’s time to explore alternative solutions. There are numerous ways to resolve this problem because there are numerous causes for it. You must test each one to see one works agreeably for you. So let’s get into more depth about them.
1. Change the Remote’s Batteries
This is an example of a simple solution to a problem. Every time you use your Firestick, despite how little it uses, power is still used. Additionally, over the course of a year, it adds up. Don’t presume that because you just bought fresh batteries that this is the cause. You might have purchased faulty batteries. So, give new batteries a shot. Also check Hazel Sky Keeps Crashing on PC
You need to first remove the storm cover from the back of the remote in order to replace the artillery in your Firestick remote. Two AAA batteries are typically used by the Amazon Firestick. After changing the batteries, confirm that the problem has been fixed. If not, try the fixes below.
2. Check for remote Pairing problems
A new Amazon Firestick or other streaming gadget comes with a remote that has already been associated with it. Therefore, you don’t need to complete any additional duties in order to begin using your Fire TV set.
However, there are instances where your Fire Stick and remote control were not initially paired or the device became unpaired over time. If so, try to pair your Firestick and remote by following the instructions.
Start your TV by connecting your Firestick to it.
Set your remote control next to the Firestick.
Press & hold the Home button on your Fire TV remote for 10 seconds.
Your remote and firestick may now be matched, so check to see if the issue is still present.
3. Check for distance and Obstruction problems
You can control your device from across the room thanks to the Bluetooth-enabled Fire Stick and Fire TV remotes, which employ that technology instead of infrared. You don’t even need to point the remote towards your device because the Bluetooth signal’s intensity has nothing to do with how the remote is pointed.
The effective range of a remote, which is roughly 30 feet, might be decreased due to a variety of variables. If there are any obstructions between the remote and the Fire Stick or Fire TV, the remote’s range will be significantly reduced. Therefore, see whether there is anything in the way or a problem with distance between the remote and the firestick. Also check How to Fix Roblox Error Code 268
4. Check for Interfering devices
Some advantages of Bluetooth remotes over infrared remotes include the fact that you don’t need to place the remote in direct line of sight with the firestick for it to function. The firestick can be used by just pressing the button while aiming. There are certain disadvantages, though. The Bluetooth remote is prone to interference from nearby objects. These things consist of:
- A microwave oven
- Bluetooth speakers
- Coaxial cables without shields
- Mobile phones
- Additional wireless gadgets
Make sure to keep any such items far from your Bluetooth remote if you have them. Check to see whether the issue has been resolved now. If not, you can always use the following procedure to reset your firestick.
5. Restart your Firestick
You should think about resetting your firestick if the issue continues. You must have a functioning remote for this operation, so you can download the Fire TV Phone App from the relevant app stores. By using this virtual remote, you may manage your Firestick. Also check Surface Pen not writing
Resetting your Firestick restores it to the state it was in when you first purchased it. Therefore, you will need to download all of the apps and sign in to them again. How to reset your firestick is provided here.
Go to Settings > My Fire TV on your firestick.
“Reset to Factory Defaults” can be found by scrolling down; tap on it.
Once the decision is confirmed, the firestick will quickly reset.
There are no other ways to fix your Firestick remote if it is only partially or completely unresponsive. If none of the aforementioned solutions work, your only options are to take your remote to a service centre or buy a new one.